Menu
Your Cart

Components

Components
1uf SMD Capacitor Package(1206) Pack of 10 ..
Rs. 23.60
Ex Tax:Rs. 20.00
2.2uf 63volts Radial Electrolytic Capacitor   This is a 2.2uf 63 volts radial polarised good quality Electrolytic capacitor. Electrolytic capacitors are widely used in power supplies, switched-mode power supplies and DC-DC converters. This capacitor has long life, low leakage current and..
Rs. 5.90
Ex Tax:Rs. 5.00
220K ohm - SMD Package (1206) (10 units)...
Rs. 23.60
Ex Tax:Rs. 20.00
Potentiometer (POT) – 22kA Three terminal resistor with sliding contact to act s voltage dividerSpecification1/4 in. Shaft Diameter 3/8 in. Shaft Length form Threads ..
Rs. 21.24
Ex Tax:Rs. 18.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the ..
Rs. 14.16
Ex Tax:Rs. 12.00
24C04 512x8(4k) Serial CMOS EEPROM.   Features:   Low Voltage and Standard-Voltage Operation 2-wire Serial Interface Schmitt Trigger, Filtered Inputs for Noise Suppression Bi-directional Data Transfer Protocol 100kHz and 400kHz Compatibility Write Protect Pin for Hardware Data P..
Rs. 16.52
Ex Tax:Rs. 14.00
24 Volt 10 Ampere Cube relay This is a sealed 24 volt High quality Single Pole Double Throw (SPDT) Cube Relay. This relays can be used for switching High voltage 230 Volt devices and has current rating upto 10 ampere.  This is a perfect relay if you want to switch low power devices up..
Rs. 30.68
Ex Tax:Rs. 26.00
25N120 IGBT 25N120 1200 Volt, 25 Ampere NPT IGBT offers superior conduction and switching performances, high avalanche ruggedness and easy parallel operation. This device is well suited for the resonant or soft switching application such as induction heating, microwave oven.  Features of 25N1..
Rs. 141.60
Ex Tax:Rs. 120.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the I..
Rs. 14.16
Ex Tax:Rs. 12.00
Specification:    Transistor Polarity: NPN  Collector Emitter Voltage V(br)ceo: 30V  Power Dissipation Pd: 500mW  DC Collector Current: 800mA  DC Current Gain hFE: 100  Transistor Case Style: TO-18  No. of Pins: 3  Collector Emitter Voltage Vce..
Rs. 10.62
Ex Tax:Rs. 9.00
2N3904 is a common NPN bipolar junction transistor.   Features: Collector emitter voltage (Vce) of 40V Continuous collector current (Ic) of 200mA Power dissipation of 625mW Operating junction temperature range from -55°C to 150°C Collector emitter saturation vol..
Rs. 10.62
Ex Tax:Rs. 9.00
The 2N3906 is a commonly-used PNP bipolar junction transistor intended for general purpose low-power amplifying or switching applications. It is designed for low electric current and power and medium voltage, and can operate at moderately high speeds. When looking at the flat side with the l..
Rs. 10.62
Ex Tax:Rs. 9.00
Showing 25 to 36 of 246 (21 Pages)