Menu
Your Cart

Connectors

Connectors
Connectors
TXS0108E High-Speed Full-Duplex 8 Channel Logic Level Converter. If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. This bi-directional logic level converter is a small device to convert the 1.8V 3.3V 5V logic level mutually enable you to success..
Rs. 129.80
Ex Tax:Rs. 110.00
Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries...
Rs. 11.80
Ex Tax:Rs. 10.00
This is DB25 male type connector with facility to solder wires on inner side.The DB25 (originally DE-25) connector is an analog 25-pin plug of the D-Subminiature connector family (D-Sub or Sub-D).As with the DB9 connector, the DB25 is mainly used for serial connections, allowing for the asynchronous..
Rs. 47.20
Ex Tax:Rs. 40.00
DB9 Female Connector (Wire type)   Description This is DB9 Female type connector with facility to solder wires on inner side for making serial cables as per your customized connections. The DB9 (originally DE-9) connector is an analog 9-pin plug of the D-Subminiature connector family (D-Sub ..
Rs. 14.16
Ex Tax:Rs. 12.00
DB9 connectors were once very common on PCs and servers.  DB9 connectors are designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard, so that multiple companies could design them into their products.  DB9 conne..
Rs. 14.16
Ex Tax:Rs. 12.00
DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5mm jack, with a 2.1mm center pole diameter...
Rs. 11.80
Ex Tax:Rs. 10.00
This is standard 2.1 mm DC power plug/jack. Threaded plastic cap, and wires can be soldered and crimped for longer life. ..
Rs. 23.60
Ex Tax:Rs. 20.00
DC Power Jack - Female Connector with 2 pin Screw Terminal If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other. The terminals are labeled with positi..
Rs. 29.50
Ex Tax:Rs. 25.00
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and two normal terninal wire on the other. Red wire is positive and black/white wire is negative.    ..
Rs. 17.70
Ex Tax:Rs. 15.00
Showing 1 to 12 of 24 (2 Pages)