This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of leds are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings option..
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs.
The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acce..
ADXL345 Triple-Axis Accelerometer Module
The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C..
This is CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front ..
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm.
The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module can be used for easy integration into your devices and basic gesture detection applications. Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply.
The sensor conta..
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do.
It offers excellent range accuracy and stable readings in an easy-to-use package. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustic..
IR based reflective object/proximity sensor
Potentiometer for maximum range setting
Can be used to differentiate between black and white (Can be used for line sensing)
Onboard LED indication for detection
Works on 5V or 3.3V input
TTL compatible output
This is an Infrared Transmitter and receiver which together make up a photoelectric sensor.
The sensor has a long detection distance, and has less interference by visible light because it uses modulated Infrared light. This sensor has a screwdriver adjustment to set the detected distance, then give..
Size: 91 * 51 * 32mm
Fixing hole: 3mm
Hole: 2000 * 1600mil (50.8 * 40.64mm)
Voltage: 3.3V, 5V
Ports: Each rocker 2 analog voltage 1 digital level
Platform: Arduino, SCM, ARM, Raspberry pie
X, Y-axis output for the two potentiometers can be read through AD conversion twist angle
A Hall effect sensor is a transducer that varies its output voltage in response to a magnetic field. Hall effect sensors are used for proximity switching, positioning, speed detection, and current sensing applications...