Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: 0.08W at full screen illumination
Supply Voltage Tolerance: 3V ~ 5V DC
Working Temperature: -30 ° C ~ 70 ° C
Module Size: 32.0MM * 35.50MM * 4.1MM
OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s.
The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The or..
Blue 16x2 Chars LCD Display widely used character displays. Extremely easy to use with all of the major microcontrollers.
You should have seen it on hobbyist as well as industrial projects As the name says it can display 16 characters on 1 line. There are 2 lines, which can be used to displa..
This is one of the most popular display device used. This is a 16x2 (16 Characters on 2 lines) LCD with Black font and Yellow Backlight.
There are many readily available libraries for interfacing it with Arduino, Raspberry Pi or other Development Boards and Micro-Controllers/Processors.Thi..
These modules provide a quick visual reference of the charge status (capacity) of 18650 Lithium-ion batteries, as well as other lithium batteries with a maximum voltage of 4.2 volts per cell.
This battery capacity display module is perfect for DIY power supplies, battery chargers, RC and electric ve..
2.4 inch TFT touch screen LCD Arduino Shield
2.4" diagonal LCD TFT display
Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
Colorful, 18-bit 262,000 different shades
4-wire resistive touch s..
2.9 Inch E-Paper Module Printed Circuit Board is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it..
Green LCD Display 20x4 Character
This is an industry standard JHD629-204A based controlled 4 lines x 20 characters LCD display with Black characters on Green background and back light. It is a parallel interface so you will need 7 pins for 4-bit mode or 11 pins for 8-bit mode to interface to ..
Basic 20x4 Character LCD - White on Black 5V
20 characters wide, 4 rows
White text on blue background
Connection port is 0.1" pitch, single row for easy breadboarding and wiring
Single LED backlight with a resistor included, you can power it directly from 5V
3.2 inch Resistive Touch Screen TFT LCD for Raspberry Pi B/B+/Pi 2
Designed for Raspberry Pi Model B/B+/Pi 2, easy to use.
Supports Raspbian Operating System, enables your system to:
Play videos (supports multi formats, MP4 and so on)
Take photos by touching (up t..
This is a basic, 4-digit 7-segment display - red in color. It has a Common Anode. The display features one decimal point per digit. The LEDs have a forward voltage of 1.9VDC and a max forward current of 20mA. The hardware interface is twelve (two rows of six) through-hole pins...