Robotics
-250x250.jpg "100 RPM BO Series DC Motor (Straight)")
QUICK OVERVIEW:
Shaft length: 7 mm.
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12v.
Current (without loading): 40-180mA.
RPM: 100 rpm.
Output Torque: 1 kgcm...
Rs. 55.00
These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gear box assembly.
This DC Motor – 100RPM – 12Volts can be used ..
Rs. 150.00
Discontinued
A stepper motor is an electromechanical device which converts electrical pulses into discrete mechanical movements.
The shaft or spindle of a stepper motor rotates in discrete step increments when electrical command pulses are applied to it in the proper sequence. The motors rotation has several di..
Rs. 120.00
Hot
Plastic single Battery holder for 18650 batteries
Suitable for holding a 18650 battery on a pcb or any circuit. Standard dimensions of this battery are:
Diameter : 18.3 ± 0.1 mm ( Max. 18.4 mm ) Height : 64.9 ± 0.2 mm ( Max. 65.1 mm ).
Two or more holders can be placed/fixed s..
Rs. 30.00
2 - 3 Days
A battery holder is one or more compartments or chambers for holding a battery.A battery holder is a plastic case with the shape of the housing molded as compartments that accepts batteries. Coiled spring wire or flat tabs that press against the battery terminals are the two most common methods of m..
Rs. 30.00
Comes with Battery Holder and Encoder
Comes disassembled. Requires a Screwdriver to assemble (not included in the Kit)
..
Rs. 500.00
BO(Battery Operated) light weight DC geared motor which gives good torque and rpm at lower voltages. This motor can run at approximately 300 rpm when driven by a single Li-Ion cell. Great for battery operated light weight robots. It can do reverse and forward directions.
Specifications:
Working ..
Rs. 120.00
Out Of Stock
A battery holder is one or more compartments or chambers for holding a battery.A battery holder is a plastic case with the shape of the housing molded as compartments that accepts batteries. Coiled spring wire or flat tabs that press against the battery terminals are the two most common methods of m..
Rs. 60.00
2 - 3 Days
500 RPM 12 V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel. Features:500 RPM 12 V DC motors with Gearbox3000 RPM base motor6mm shaft diameter w..
Rs. 150.00
Futaba S3003 is a standard servo motor which is mostly used by hobbyist and electronics student in cars, boats, servo motor standard applications.
This is the replacement for the following servos, S138,S148,S22,S38 and S12. This motor is controlled by Arduino , Raspberry pi or other microcontroller..
Rs. 495.00
This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torque to move small robots. The motor can be connected with gear shaft and propeller.
Specifications:
High quality stepper motor
Voltage: DC 5V
Diameter: 25mm
Step Angle: 5.625 x 1/..
Rs. 120.00
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of leds are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings option..
Rs. 550.00