Input: DC 4.5V--7V (input voltage must be greater than the output voltage high above 1V.)
Output: 3.3V, 800mA (load current can not exceed 800ma)
Dual-panel design, the layout is nice;
Specially designed two rows of needle fixing holes can be fixed direc..
3.3v Breadboard Power Supply is compatable with standdard Bread Boards but not compatable with GL-12 Bread Board.
Bread Board power supply module, compatible with 5V, 3.3V for MB102 Model
For MB102 bread plates
Input voltage: 6.5-12V (DC) or US..
BR68 is a Single Phase 6 Amp Bridge Rectifier. Its Reverse Voltage Rating is 800V and forward Voltage rating is 1V. It is 4 Pin through hole type rectifier.
No. of Phases: Single
Repetitive Reverse Voltage Vrrm Max: 800V
Forward Current If(AV): 6A
A voltage regulator IC maintains the output voltage at a constant value. 7805 IC, a member of 78xx series of fixed linear voltage regulators used to maintain such fluctuations, is a popular voltage regulator integrated circuit (IC). The xx in 78xx indicates the output voltage it provides...
7806 - Voltage Regulator – 6V
7806 is a voltage regulator integrated circuit. It is a member of 78xx series of fixed linear voltage regulator ICs.
The voltage source in a circuit may have fluctuations and would not give the fixed voltage output. The voltage regulator IC maintains the output ..
7808 - Voltage Regulator – 8V
LM7808 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They a..
LM7809 – Voltage Regulator
The LM7809 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They ..
The LM78XX series of three terminal positive regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essenti..
Brand new and high quality.
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.
Applicable appliance: electric furnace, water heater, lamps, small motor, electric iron etc.
10 Amp Bridge Rectifier (BR1010)
Peak Reverse Voltage (Vrrm): 1000V
Max. RMS Bridge Voltage (Vrms): 700V
Max. DC Blocking Voltage (Vdc): 1000V
Av. Forward Rectified Current (Io): 10.0A
Maximum Reverse Current (Ir): 5µA
Forward Volt Drop per Element (Vf): 1.1V
DB107 is a 1 Amp Bridge Rectifier with forward voltage of 1.1V and 1kV reverse voltage. It is 4 Pin through hole type rectifier.
No. of Phases: Single
Repetitive Reverse Voltage Vrrm Max: 1000V
Forward Current If(AV): 1A
Forward Voltage VF Max: 1.1V
No. of Pins: 4
Diode Mounting T..
KBL10 - Bridge Rectifier Diode, Single Phase, 1 kV, 4 A, SIP, 1.1 V, 4 Pins
Ideal for printed circuit board
Realiable low cost construction
High surge current capability
Bridge Rectifier Case Style: SIP