High quality adjustable angle antenna with integrated SMA connector. Designed for low power 2.4GHz transceivers such as 802.11b/g, Bluetooth, and other 2.4GHz telemetry modules with suitable connector. Angle of antenna can be adjusted to a 90° right-angle...
This hybrid transmitter module provides a complete RF transmitter and receiver module solution which can be used to transmit data at up to 3KHz from any standard CMOS/TTL source.
The transmitter module is very simple to operate and offers low current consumption (typ. 11mA). Data can be supplied dir..
This module use LC circuit design, include amplification and rectification, output data signal is decode high TTL signal which is convenient to use, cheap and use widely.
Receive module has wide receive band width, usually is ±10MHz, the default setting is 433.92MHZ. The receive module use D..
DRF1276DM is a type of long range low data rate data radio modem based on SX1276 from Semtech. DRF1276DM is a low-cost sub-1 GHz transceiver module designed for operations in the unlicensed ISM (Industrial Scientific Medical) and LPRD bands. Frequency spectrum modulation/demodulation, multi-channel ..
Antenna GSM- 2DBI Sticker is a Quad-band antenna for embedded cellular devices.
This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.
This antenna is compati..
This antenna is designed for GSM GPRS 900/1800mhz system of communication terminal system.
The antenna is structure compact and convenient for easy installation. Commonly used in GSM repeater,GSM sensor,GSM module & GSM modems.
This antenna is compatible with SIM900A and SIM808.
Electri..
Bee Adapter is a compact USB to Serial adapter equipped with XBEE (20pin 2.0mm) socket. With integrated FT232RL USB to Serial Converter, it can be used to program or interface any XBEE module over USB. Onboard FT232RL makes programming, debugging and communication very easy and user-friendly.
Featu..
CC2500 2.4GHz Transceiver module is built with Texas instrument's Chipcon IC ( CC2500 ) . It can be used to transmit and receive data at multiple baud rates from any standard CMOS/TTL source. The RF module is built with on board PCB trace antenna and it can used as SMD module as well as Through-..
This Module is based on Qualcomm's CSR8645 Bluetooth Audio Platform IC.The CSR8645/F3188 is an easy and cost-effective platform for developing wireless audio products and supports reduced development time. It is an ideal solution for a range of highly differentiated home entertainment and wearable a..
The development board is based on the WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping. It is flashed with the NodeMCU firmware and can be set up and programmed right away with the on-board microUSB connection. With only few lines of code the NodeMCU Dev Kit is connected to..
E44-TTL-100 is a 100mW wireless transceiver module with LoRa spread-spectrum technology,operates at 900~931MHz (Default: 915MHz), based on original imported RFIC SX1276 fromSEMTECH,transparent transmission is available, TTL level. The module adopts LoRa spread-spectrum technology,which means the tra..
Breakout board for ESP 12E
Tired of soldering ESP8266 ESP-12 Modules on Zero PCB for your project? Then this is the perfect Breakout board for you. This is breakout board also supports ESP8266 ESP-7 & ESP12E.
So if you are starting with IoT & if you are starting with ESP8266 ESP-12 Mo..