Cables, Converters & Wires
4 USB ports standard A type upto 100 mA current per port, 1 USB Mini B type female input connector.
The QHMPL hub provides full over current protection, QHMPL USB hub supports the following signaling rates, A low-speed rate of 1.5 Mbit/s as is defined by USB 1.0. A high-speed (USB 2.0) rate of 480 ..
Rs. 230.10
Ex Tax:Rs. 195.00
Hot
The 9V Battery Snap Connector with Power Plug is provides the ability to conveniently use a 9V battery to power many common boards and modules.
such as the popular Arduino and compatible microcontrollers. This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diamete..
Rs. 23.60
Ex Tax:Rs. 20.00
2 - 3 Days
A Breakout Board for ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier.The ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmabl..
Rs. 442.50
Ex Tax:Rs. 375.00
Standard Cat 5 Ethernet Cable for use with Raspberry Pi or any PC/Laptop with a RJ45 jack (Ethernet port).
This is 2M in length.
..
Rs. 59.00
Ex Tax:Rs. 50.00
3.3V USB to TTL Serial Converter. Use this device to connect your PC to a serial (TTL level) device. Uses CP2102 chipset and has a standard 0.1" pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU. You can use this to program your Arduino Mini or ESP-12 Work..
Rs. 230.10
Ex Tax:Rs. 195.00
New
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channe..
Rs. 761.10
Ex Tax:Rs. 645.00
2 - 3 Days
The DVI is used to connect a video source to a display device, such as a computer monitor. The interface is designed to transmit uncompressed digital video and can be configured to support multiple modes such as DVI-D (digital only), DVI-A (analog only), or DVI-I (digital and analog). DVI..
Rs. 223.02
Ex Tax:Rs. 189.00
2 - 3 Days
DVI-D Dual Link Male to HDMI Female Adapter seamlessly adapts DVI-D to HDMI. HDMI, the efficient high-definition digital audio/video standard,is compatible with all digital video connection(DVI). DVI-D Dual Link Male to HDMI Female Adapter makes it easy to enjoy the ultra-high definition videos..
Rs. 223.02
Ex Tax:Rs. 189.00
Hot
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and two normal terninal wire on the other. Red wire is positive and black/white wire is negative.
..
Rs. 17.70
Ex Tax:Rs. 15.00
Hot
FT232RL FTDI USB to TTL Serial Adapter Module for Arduino Mini Port 3.3V 5.5V.
Features:
Support 3.3V, 5V
Chipset: FT232RL
USB power has over current protection, using 500MA self-restore fuse
RXD/TXD transceiver communication indicator
Pin definition: DTR,RXD,TX,VCC,C..
Rs. 253.70
Ex Tax:Rs. 215.00
2 - 3 Days
This HDMI female to female adapter is to extend your HDMI cable, joining two cables together. In addition, it is useful when you want a HDMI gender change that converts the male HDMI connector into a female connector.
Features:
● High quality HDMI Female to Female Gender Change..
Rs. 177.00
Ex Tax:Rs. 150.00