This is a Linear single turn rotary potentiometer with plastic shaft. This pot is suitable for panel mounting. This 100K ohm potentiometer (pot) gives variable resistance value for its different shaft position. it can varies from 0-100K ohm value. ..
HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of decoders are mainly used for remote control system applications, like burglar alarm, car door controller, security system etc. It is mainly provided to interface RF and infrared circuits. They are pair..
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data for..
7400 IC is 14 pin DIP version of the popular NAND Gate IC.
The 7400 series contains hundreds of devices that provide everything from basic logic gates, flip-flops, and counters, to special purpose bus transceivers and arithmetic logic units (ALU). Specific functions are described in a li..
7404 is a NOT Gate IC ,This a 14 pin DIP version of the popular NOT Gate IC.
7404 is a NOT gate IC. It consists of six inverters which perform logical invert action. The output of an inverter is the complement of its input logic state, i.e., when input is high its output is lo..
LM358 indicates an 8-pin chip, containing two op amps at low power.
The LM358 is designed for general use as amplifiers ,high-pass filters and low , band pass filters and analog adders.One of the characteristics of this IC is to be designed to operate with a single static power supply ranging from ..
This Module is a simple breakout board for this easy to use expander IC. This PCF8575 module allows the user to expand up to 16 I/O using only two I/O for control.
PCF8575 IO Expander Module Specifications:
Working voltage: 2.5 - 5.5VDC
Working current: 100mA(MAX)
I2C address: 0x20(defa..