This is a 16 pin SMD to DIP adapter a perfect PCB if you do not want to solder your IC directly on the main PCB. This is a double sided PCB. Each side has 16 pins for mounting various packages of 16 pin IC. This PCB supports SO16, SOP16,SOIC16,SSOP16,TSSOP16 and MSOP16 IC packages with 1.27mm &..
The SMD TO DIP 8pin ADAPTER is a tiny adapter for all SO, SOP, TSSOP, MSOP based SMD chips/transistors. You can solder your SMD chips or use for programming PIC12F629/675 like chips.
It is Dual-sided SOP8/SOIC8/SO8/TSSOP8/SSOP8 SMD to DIP adapter, one side is for pin pitch size 0.65 mm, and another ..
This board listens to incoming sound through MIC. When it detects sound activity it generates output for a preset amount of time.
The output duration of the high signal can be adjusted by user using the onboard potentiometer. This output can be given to microcontroller directly. During silence ther..
This is a 3-terminal microswitch,equipped with a 17mm lever actuator. These switches have a great ‘clicky’ sound to them with a nice tactile feel and are perfect when used for a slider, 3D printer, or robot project. Each microswitch is rated for 5A at 250VAC...
A single-pole, single-throw (SPST) switch is as simple as it gets. It’s got one output and one input.
The switch will either be closed or completely disconnected. SPSTs are perfect for on-off switching. They’re also a very common form of momentary switches. SPST switches should only req..
ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project.
DC 3v to 6v submersible pump
micro mini submersible water pump 3v to 6v
DC water pump for DIY
DC pump for HOBBY kit
Mini Submersible Pump Motor:
This is a low cost, s..
This is 12mm x 12mm thru hole tactile switch offers reliable dome contact technology with strong tactile/audible feedback. Its multiple operating force options allows it to be applied to many industries: telecommunications, consumer electronics, medical, testing/instrumentation, computer/servers/per..
TDA2030 is a 14W audio amplifier IC comes in TO220-5 pentawatt package. This IC has a very low harmonic distortion, short circuit protection and thermal shutdown. This audio amplifier can work with single supply as well with dual supply, can be bridge for higher output power. Check the datasheet for..
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, ..