Components
This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up White. So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA..
Rs. 55.00
This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA..
Rs. 55.00
This is a DC to DC step-down module base on LM2596 3A Step-Down Voltage Regulator. The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down(buck) switching regulator, capable of driving a 3A load with excellent line and load regulation...
Rs. 65.00
The LM350 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 3A over a 1.2V to 33V output range.They are exceptionally easy to use and require only 2 external resistors to set the output voltage.Further, both line and load regulation are comparable to di..
Rs. 90.00
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation.
This is an adjustable output version. Requiring a minimum number of external compo..
Rs. 35.00
2 - 3 Days
This adjustable voltage regulator can provide you with an adequate power supply for your new electronics project.
Specifications:
Output current: up to 1.5 A (minimum), up to 2.2 A (typical).
Adjustable output voltage range: between 1.2 V and 37 V.
Maximum input-output voltage differential: 40..
Rs. 150.00
The LM317 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range.
Features
Output voltage range: 1.2 TO 37V
Output current in excess of 1.5A
0.1% line ..
Rs. 21.00
Hot
Out Of Stock
LM358 indicates an 8-pin chip, containing two op amps at low power.
The LM358 is designed for general use as amplifiers ,high-pass filters and low , band pass filters and analog adders.One of the characteristics of this IC is to be designed to operate with a single static power supply ranging fro..
Rs. 8.00
LM386 200 times Gain Audio Amplifier Module
Specifications:
Onboard LM386 chip
Circuit designed for 200 gain
On-board speaker wire holder
Board 10K adjustable resistance to adjust the volume.
Onboard power LED indicator
Main chip's pin leads directly to the input audio signal
Operating vol..
Rs. 145.00
Specifications
Input Voltage -35V
Output Voltage -9V
Topology Standard
Regulator Output Type Fixed
Polarity Type Negative
Number of Outputs 1
Package Type TO-220AB
Packaging Rail/Tube
Output Current 2.2(Typ)A
Load Regulation 180mV
Line Regulation 180m..
Rs. 15.00
The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two ..
Rs. 95.00
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens.These types of switches are primarily used in home security systems. One half of the assembly set on a window or door frame and the other attached to..
Rs. 95.00