Self assembly Mini Solar Powered DIY Car Kit
DIY Solar Car with exquisite color graphical installation tutorial, contains screwdrivers, the production process is very simple
Model of solar energy generator
Size: 10 cm * 10 cm * 5 cm (l * w * h)
Weight: 121 g
1Pc Mini Sola..
This is a 12 inch Servo Extension with J Connectors
This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, F..
A smart little servo tester than can be used to test servo motor, ESC and also to determine motor direction. Tests up to 3 servos at the same time.
The device also can be used as a signal generator for electric speed controller (ESC), for testing your motor system without using a transmitter and re..
Speed: 0.1 sec / 60 deg at 4.8V
Torque: 1.6 Kg – cm at 4.8V
Size: 21.8 X 11 X 19.8mm
Wire Length: 10cm
Pin Header: 2.54mm spacing
Wire Color Code
Red: Positive Power Input
Black: Negative Power Input
DC motor used for vaious applications like robotics, momentary projects etc. The output shaft has a hold for best mounting for wheels and pulleys.
Operating Voltage Range = 3 - 6V
Nominal Operating voltage = 5V
No Load characteristics
No load speed = 13600 r/min
Stepper Driver Module consists of ULN2003-IC which is used to drive the stepper motor.
Use ULN2003 driver chip, 500mA
A. B. C. D LED indicating the four phase stepper motor ..
This module uses TCS3200D, which is the upgraded version of TCS230D. TCS3200 is a static object color detection chip which can output different frequency based on different color sensed and then MCU can read the RGB color via frequency collection and conversion.
This is high powered servo manufactured by Tower Pro. Its robust, quick and has metal gears. This servo is used primarily on steering of model cars or other similar applications. While it can also be used in RC, its preferable not to use it on a Y lead.
Track Belt -2Cm Width:Track belt is a loop of flexible material, which can be used either as a conveyer belt or a mechanism to move your robo. Belts are looped over pulleys, these pulleys have a groove running all through so that the belts fits perfectly inside.1 meter long track belt for making tra..
ULN2003 Stepper Motor Driver Board is to use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It's easy to use Arduino or other development platform to drive the stepper motor by this diver board.Product Wiki..
The ULN2003A is a high-voltage, high-current Darlington transistor array consisting of seven NPN Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads.
The collector-current rating of a single Darlington pair is 500 mA.
Bring in some muscle to your output pins with 8 mighty Darlingtons! This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one directio..