Robotics
L293D Arduino motor drive shield for Servo,Stepper And DC Motor
Features:
The shield contains two L293D motor drivers and one 74HC595 shift register.
The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
The output enable of the L293D ..
Rs. 195.00
ESP-12E Motor Shield is designed and developed by Shenzhen Doctors of Intelligence & Technology (SZDOIT). This large current motor driven module can compatible with ESP12E Dev Kit and NodeMCU.By using the overlap-plug design, the motor shield can be directly plugged by ESP-12E Dev Kit and N..
Rs. 250.00
L293D is a dual H-bridge motor driver integrated circuit (IC).Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
L293D contains two inbuilt H-bridge driver circuits. In its..
Rs. 42.00
This module is a medium power motor driver perfect for driving DC Motors and Stepper Motors.It uses the popular L293D motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the directions.FeaturesL293D motor driver IC.Male burgstick connectors for supply, ground and..
Rs. 110.00
The L298N driver module, using ST’ L298N chip, can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry , support 3.3VMCU control. you can easily control the DC motor speed and direction, also control the 2-phase stepper motor.
Features:
..
Rs. 195.00
The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provi..
Rs. 110.00
The L9110S 2-Channel motor driver module is a compact board that can be used to drive small robots. This module has two independent motor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5..
Rs. 175.00
Specification:Operating Voltage Range: 12V - 36VRated Voltage: 24VRated Current: 0.7ARated Torque: 62mN.mNo Load Speed: 4100 rpmMotor Weight: 230gInput VoltageOutput Speed12V2000RPM18V3075RPM24V4100RPM36V6150RPM..
Rs. 295.00
MG90S Metal Gear Mini Servo is tiny and lightweight with high output power, this tiny servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot. This servo has metal gear for added strength and durability. Servo can rotate approximately 180 degree(90 in each direction), and works just like t..
Rs. 210.00
Specifications:Model:RK-370CMotor diameter:24mmMotor height:30.5mm(excluding the front and rear bearing sleeve)Output shaft:2.0mmOutput shaft length:10mmWeight:50gVoltage:3-12vSpeed:3500rpm(6V)..
Rs. 195.00
A Hall effect sensor is a transducer that varies its output voltage in response to a magnetic field. Hall effect sensors are used for proximity switching, positioning, speed detection, and current sensing applications...
Rs. 42.00
-250x250.jpg "Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)")
Out Of Stock
Description: This is essentially a ramped up version of our Ardiumoto motor driver shield. For this Monster Moto Shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of hi..
Rs. 295.00