Covid 19 DIY Products & Solutions Components and Accessories
New
Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Specification:
Ultra-low power consumption: 0.08W at full screen illumination
Supply Voltage Tolerance: 3V ~ 5V DC
Working Temperature: -30 ° C ~ 70 ° C
Module Size: 32.0MM * 35.50MM * 4.1MM
I2C I..
Rs. 240.00
Out Of Stock
1/2 inch DC 12V 250mA Electric Solenoid Valve Flow Switch
Specifications :
Current
250mA
Voltage
12V DC
Pressure
0-0.8MPa
Operation Mode
Normally closed
Fluid Temperature
1-100℃
Maximum Size
84 x 53..
Rs. 375.00
Hot
This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC,Raspberry Pi, any other microcontroller operating at 5V.
Features:
Imported high quality double sided compact PCB.
Opto-Isolated inputs, means your digital elec..
Rs. 95.00
Hot
4 Channel Relay Module board is used to interface any Microcontroller with Electrical Appliances/Loads. Can also be used in driving high power motors.4-channel relay output modules, relay output contacts 250A 10A. Input IN1, IN2, IN3, IN4, the signal line LOW effective. VCC, GND power input, can rel..
Rs. 180.00
Futaba S3003 is a standard servo motor which is mostly used by hobbyist and electronics student in cars, boats, servo motor standard applications.
This is the replacement for the following servos, S138,S148,S22,S38 and S12. This motor is controlled by Arduino , Raspberry pi or other microcontroller..
Rs. 495.00
Hot
5V 1-Channel Relay Module for Arduino and Raspberry pi/B+/Pi 2
Description:
5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current
Equipped with high-current relay, AC250V 10A ; DC30V 10A
Standard interface that can be controlled directly by microcontroller ,s..
Rs. 75.00
Hot
Relay - 10A - 5V DC (RW-SH-106D)
Basic Specs:
5V DC
10A/24VDC
12A/120VAC
5A/250VAC
Detailed Specs
RW / RWH
Click and drag to move
Outline (L x W x H)
19 x 15.4 x 15 mm
Weight
9 g
Features
High switching current up to 15A in small size.
RWH is approved C-UL & T&..
Rs. 26.00
Hot
The 9V Battery Snap Connector with Power Plug is provides the ability to conveniently use a 9V battery to power many common boards and modules.
such as the popular Arduino and compatible microcontrollers. This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diamete..
Rs. 20.00
BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations.
This is a more acurate and easier to use version of the simple foto resistor which only outputs a voltage that needs to be calc..
Rs. 175.00
Hot
Breadboard-Medium size consists of 500 connecting points.
This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as ..
Rs. 70.00