5V 2Amps DC Power Adapter

A breadboard (or protoboard) is usually a construction base for prototyping ..

Bread boad-Medium size consists of 500 connecting points. This is a cute half size breadboa..

DHT22 (AM2302) – Humidity and Temperature Sensor is a low cost humidity and temperature sensor ..

The Raindrop Detection Sensor module is an easy-to-use and low cost drop recognition sensor.The se..

Soil moisture plays a key role in the life of the plant.  Nutrients in the soil solution provid..

The DT830D Digital Multimeter is a very affordable and handy piece of test equipment. It features an..

Resistor BoxAssorted collection of Resistors. This Resistor Box contains a total of 150 Resistors..

Collection of different types of capacitors4.7 pf, 10pf, 15pf, 22pf, 33pf, 56pf, 68pf, 82pf, 82pf, 1..

The 9V Battery Snap Connector with Power Plug is provides the ability to conveniently use a 9V batte..

The most common form of nine-volt battery is commonly called the transistor battery.These were i..

This 2 Pin Wire to Board connector are used widely for connecting Wires to Boards,It can be for Po..

A wire stripper is a small, hand-held device used to strip the electrical insulation from electric w..

This is a 25 Watt pointed tip; it can be used with any standard 25 W soldering iron. This tip is par..

Tin/lead solders, also called soft solders, are commercially available with tin concentrations betwe..

A soldering iron stand keeps the iron away from flammable materials, and often also comes with a cel..

Good quality Soldering Iron Bit by Soldron. This is a Nickel Plated 3mm 25 Watt&..

Collection of male to male jumper wires-10 PiecesHandy for making wire harnesses or jumpering betw..

Female to Female jumper wires..

Collection of Male to Female jumper wires- 10 Pieces..

Collection of Male to Female jumper wires- 40 PiecesHandy for making wire harnesses or jumpering b..

These are two pin jumpers 2mm Pitch (also called shunts) that will create an electrical connect..

GSM module is used to establish communication between a computer and a GSM system. GSM module consis..

4 Channel Relay Module board is used to interface any Microcontroller with Electrical Appliances/Loa..

This breadboard can be used to prototype electronic circuits without soldering. It works great for c..

Not working on Windows 10 yet.The cable is easiest way ever to connect to your microcontroller/Ras..

This product is a 2-channel relay module board with LED indicators, It can be controlled by microcon..

The NodeMcu is an open-source firmware and development kit that helps you to Prototype your IOT..