Your Cart

Intel Galileo Gen 2

Intel Galileo Gen 2
Intel Galileo Gen 2
Intel Galileo Gen 2
Intel Galileo Gen 2
Intel Galileo Gen 2
GST Invoice
GST Invoice for Input Tax Credit.
Bulk Order
If your required quantity is more than listed below or for Bulk Orders/Quotes, please ping us for lead times & to pre-order.
Rs. 7,074.10
Ex Tax: Rs. 5,995.00
  • Stock: Discontinued
  • Model: Intel-Galileo-Gen-2
  • SKU: PL-305

Intel Galileo Gen 2


Galileo is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It’s the first board based on Intel® architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3. This is also known as the Arduino 1.0 pinout.
Galileo is designed to support shields that operate at either 3.3V or 5V. The core operating voltage of Galileo is 3.3V. However, a jumper on the board enables voltage translation to 5V at the I/O pins. This provides support for 5V Uno shields and is the default behavior. By switching the jumper position, the voltage translation can be disabled to provide 3.3V operation at the I/O pins.
Of course, the Galileo board is also software compatible with the Arduino Software Development Environment (IDE), which makes usability and introduction a snap. In addition to Arduino hardware and software compatibility, the Galileo board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host port, USB Client port, and 8MByte NOR flash come standard on the board.

Galileo Gen 2 specs

     Intel lists the following specifications for Galileo Gen 2 in the SBC’s product brief.

      Processor — Intel Quark X1000 SoC @ 400MHz:

       32-bit Pentium-compatible ISA

      1.9 to 2.2W TDP (depending on operating voltage)

       32-bit Intel Pentium-compatible ISA

        Supports ACPI sleep states


        512KB embedded SRAM (in Quark SoC)

        256MB DDR3 DRAM


        8MB legacy SPI NOR flash (for firmware/bootloader)

        8KB EEPROM (programmable via utilities)

        Micro SD slot — supports up to 32GB

        Supports USB 2.0 storage devices

         10/100 Ethernet (RJ45; supports Power-over-Ethernet)


          USB 2.0 Host port (Type A)

           USB 2.0 Client port (micro-USB, Type B)

            10-pin JTAG port

Other I/O

         6-pin console UART (compatible with FTDI USB converters)

         6-pin ICSP

Arduino-compatible expansion headers, containing:

       20x GPIOs (12 fully native speed)

        6x analog inputs

        6x PWMs with 12-bit resolution

        1x SPI master

         2x UARTs (one shared with console UART)

         1x I2C master

          Mini-PCIe expansion — 1x slot (with USB 2.0 Host support)

          RTC — onboard battery option


      Reset button for resetting sketch and attached shields (resets Ethernet)

      Reboot button for processor restart


            7-15VDC input jack (consumption not currently specified)

            Supports Power-over-Ethernet (requires PoE module)

            Optional 3V coin cell battery for standby power

             Dimensions — 123.8 x 72.0mm (not including real-world port extensions beyond the board outline)


Intel Galileo Unboxing


Write a review

Note: HTML is not translated!
Bad Good