STM32F401 BlackPill STM32 Development Board (STM32F401CCU6)

STM32F401CCU6 Features:

• Dynamic efficiency line with BAM (batch acquisition mode)
  • 1.7 V to 3.6 V power supply
  • -40 °C to 85/105/125 °C temperature range
• Core: Arm^® 32-bit Cortex^®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• Memories
  • 256 Kbytes of Flash memory
  • 512 bytes of OTP memory
  • 64 Kbytes of SRAM
• Clock, reset and supply management
  • 1.7 V to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • 4-to-26 MHz crystal oscillator
  • Internal 16 MHz factory-trimmed RC
  • 32 kHz oscillator for RTC with calibration
  • Internal 32 kHz RC with calibration
• Power consumption
  • Run: 128 μA/MHz (peripheral off)
  • Stop (Flash in Stop mode, fast wakeup time): 42 μA typ @ 25 °C;65 μA max @25 °C
  • Stop (Flash in Deep power down mode, slow wakeup time): down to 10 μA typ@ 25 °C; 28 μA max @25 °C
  • Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V
  • V_BAT supply for RTC: 1 μA @25 °C
• 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
• General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
• Up to 11 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer

• Debug mode
  • Serial wire debug (SWD) & JTAG interfaces
  • Cortex^®-M4 Embedded Trace Macrocell™
• Up to 81 I/O ports with interrupt capability
  • All IO ports 5 V tolerant
  • Up to 78 fast I/Os up to 42 MHz
• Up to 11 communication interfaces
  • Up to 3 × I²C interfaces (1Mbit/s, SMBus/PMBus)
  • Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
  • Up to 4 SPIs (up to 42 Mbits/s at f_CPU= 84 MHz), SPI2 and SPI3 with muxed full-duplex I²S to achieve audio class accuracy via internal audio PLL or external clock
  • SDIO interface
• Advanced connectivity
  • USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• CRC calculation unit
• 96-bit unique ID
• RTC: subsecond accuracy, hardware calendar