ICs
Hot
Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40...
Rs. 8.00
The AD623 is an integrated, single- or dual-supply instrumentation amplifier that delivers rail-to-rail output swing using supply voltages from 3 V to 12 V.
The superior accuracy of the AD623 is the result of increasing ac common-mode rejection ratio (CMRR) coincident with increasing gain; line noi..
Rs. 385.00
ADC0804 - 8-bit A/D Converter
Features
Compatible with 8080 Microprocessors
Easy interface to all microprocessors, or operates 'stand alone'
Differential analog voltage inputs
Logic inputs and outputs meet both MOS and TTL voltage level specifications
Works with 2.5V (LM336..
Rs. 140.00
ADC0808 IC
Description
The ADC0808 is an 8-bit analog-to-digital converter IC.
Use it to convert analog signals to digital signals for easy interface to microcontrollers and other circuits.
Datasheet
http://www.ti.com/lit/ds/..
Rs. 95.00
Out Of Stock
The high-performance Atmel 8-bit AVR RISC-based microcontroller.
It combines 32 KB ISP flash memory with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexi..
Rs. 245.00
Out Of Stock
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 2KB ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, universal serial interface (USI), full duplex UART, and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates b..
Rs. 120.00
Pre-Order
The Atmel picoPower 8-bit AVR RISC-based microcontroller featuring 1KB of ISP Flash, 64-byte EEPROM, 64-byte SRAM, 32-Byte register file, and 4-channel 10-bit A/D converter. The device achieves up to 20 MIPS throughput at 20 MHz at 1.8-5.5 V operation.
By executing powerful instructions in a single ..
Rs. 120.00
The DS1621 Digital Thermometer and Thermostat provides 9-bit temperature readings, which indicate the temperature of the device. The thermal alarm output, TOUT is active when the temperature of the device exceeds a user-defined temperature TH. The output remains active until the temperature drops be..
Rs. 195.00
7400 IC is 14 pin DIP version of the popular NAND Gate IC.
The 7400 series contains hundreds of devices that provide everything from basic logic gates, flip-flops, and counters, to special purpose bus transceivers and arithmetic logic units (ALU). Specific functions are described in a li..
Rs. 18.00
7404 is a NOT Gate IC ,This a 14 pin DIP version of the popular NOT Gate IC.
7404 is a NOT gate IC. It consists of six inverters which perform logical invert action. The output of an inverter is the complement of its input logic state, i.e., when input is high its output is lo..
Rs. 18.00
Hot
ICL8038 is a function generator chip which can produce different waveform. ICL8038 can produce highly accurate sine, square, triangular, saw-tooth and pulse waveform with a minimum of external components. The frequency can be selected externally from 0.001Hz to more than 300kHz using either resistor..
Rs. 185.00
SpecificationStepper motor controller, 20 Dip Motor Type: Stepper No. of Outputs: 2 Output Current: 10mA Output Voltage: 3.9V Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C SVHC: No SV..
Rs. 140.00