ICs
This is a 14 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC ba..
Rs. 8.00
Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40. ..
Rs. 12.00
This is a 18 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC ..
Rs. 9.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the ..
Rs. 12.00
24C04 512x8(4k) Serial CMOS EEPROM.
Features:
Low Voltage and Standard-Voltage Operation
2-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bi-directional Data Transfer Protocol
100kHz and 400kHz Compatibility
Write Protect Pin for Hardware Data P..
Rs. 14.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the I..
Rs. 12.00
Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40..
Rs. 5.00
New
CD4017 IC - Decade Counter IC
Product Details:
Product Type: Decade Counter
IC Number: CD4017 or 4017 IC
Functions: counts from 0 to 10 as well as decode to binary number
Output type: binary number
Pin counts: 16
Technology: CMOS
Pin type: Through Hole
Package contains: 1 X 4017 counter I..
Rs. 20.00
4N35 is an optocoupler IC in which an infrared emitter diode drives a phototransistor. They are also known as optoisolators since they separate two circuits optically. These are used to couple two circuits without any ohmic contact. They allow one of the circuits to switch another one..
Rs. 18.00
This is a 6 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC ..
Rs. 8.00
New
The 74HC series are high speed CMOS chips that combine the speed of TTL (transistor-transistor-logic) and the very low power consumption of the 4000 series. They have the same pin-out as the 74LS series.
This IC is 16 pin DIP package...
Rs. 45.00
74HC595 Shift Register
The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multi..
Rs. 25.00