Raw angular rate and temperature data measurements are accessed from the selectable digital I2C or SPI interface. The small package design and SIP interface accompanied by the mounting hole make the sensor easy to integrate into your projects. Designed to be used with a variety of microcontrollers, ..
Features:
Can detect ambient brightness and light intensity
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type:
Analog voltage output -A0
Digital switching outputs (0 and 1) -D0
With fixed bolt hole for easy installation
Small board ..
The LM335 series are precision, easily-calibrated, integrated circuit temperature sensors. Operating as a 2-terminal zener, the LM335 has a breakdown voltage directly proportional to absolute temperature at +10 mV/˚K. With less than 1Ω dynamic impedance the device operates over a current range..
LM35 is a precision IC temperature sensor with its output proportional to the temperature (in oC).
The sensor circuitry is sealed and therefore it is not subjected to oxidation and other processes. With LM35, temperature can be measured more accurately than with a thermistor.&..
This is a standard Load Cell for measuring weight upto 10 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a ..
A load cell is a physical element (or transducer if you want to be technical) that can translate pressure (force) into an electrical signal.
Specifications:
https://www.sparkfun.com/datasheets/Sensors/loadsensor.pdf..
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens.These types of switches are primarily used in home security systems. One half of the assembly set on a window or door frame and the other attached to..
Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and a heart-rate sensor. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. Thi..
This is MAX6675 Thermocouple Amplifier which has Digital Serial Data Output.Thermocouples are very sensitive, require a good amplifier with a cold-compensation reference. The MAX6675 does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. Thi..
Metal detector module is used as a metal detector. When metal near (<1cm), does it make a sound.
The function and characteristics:
Working voltage: DC 5V
The board size: 60.2*65.2mm
Red line: connect to power positive
Black line : connect to power negative
Adjust the potentiometer, let th..
Metal Detector with speaker and ttl output.
Features:
VCC 9v battery
Logic high out put with common ground.
Can detect any metal at the range of 1cm to 3cm. you can connect 9v battery to make it handy.
Note: it will not detect coins if it is in the middle of the coil, it may detect if it is ..
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module is based on infrared technology, It automatically controls the products with high sensitivity, high reliability, ultra-small size, and ultra-low-voltage operation mode.
Features:
Automatic Control
Minimum size
Repeatable Trigger..