MOC3043 IC - Zero-Cross Optoisolator Triac Driver IC

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74..

DHT11 – Humidity and Temperature Sensor for Arduino and Raspberry Pi B/B+/Raspberry Pi 2.The..

They are used in gas leakage detecting  equipments in industry, are suitable for detecting of L..

The SM0038 can almost receive all IR transmitter with 38kHz signals. The outputs can be easily decod..

ESP32 Development board is based on the ESP WROOM32 WIFI + BLE Module. This is the latest generation..

The BT136 is a high performance and popular triac. It is suitable for uses in mains appliance contro..

  Features:Small size, easy to use Low voltage, low power consumption High accur..

BTA16-600 is 16Amp rating Triac. Its Gate trigger voltage is 1.5V and reverse voltage rating is 600V..

Heat Sink:A heat sink is a passive heat exchanger that transfers the heat generated by an electron..

The LM350 series of adjustable 3-terminal positive voltage regulators is capable of supplying in exc..

Dot Board (Large) ..

An LDR is a component that has a (variable) resistance that changes with the light intensity th..

BT139-800 is 16Amp rating Triac. Its Gate trigger voltage is 0.7V and reverse voltage rating is 800V..

24C04 512x8(4k) Serial CMOS EEPROM. Features: Low Voltage and Standard-Voltage O..

This is a basic, 4-digit 7-segment display - red in color. It has a Common Anode. The display featur..

This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors po..

TM1637 is a chip for driving 7-segment displays. There are several modules using this chip to form a..

This is a 6 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base ..

The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, on..

4N35 is an optocoupler IC in which an infrared emitter diode drives a phototransistor..

A single-pole, single-throw (SPST) switch is as simple as it gets. It’s got one output and one..

This heatsink is designed for Raspberry Pi controller, Pcduino controller, it has glue can be glued ..

Mini Real-Time Clock module, basically designed for Raspberry Pi, but can also be used with arduino ..

This 2 Pin Wire to Board connector are used widely for connecting Wires to Boards,It can be for Po..

Condenser Microphone: The condenser microphone, or capacitor microphone or electrostatic microphone..

This is a very simple fixed temp, quick heating, 40W(220~240V) soldering iron.Key features:..

LM358 indicates an 8-pin chip, containing two op amps at low power.The LM358 is designed for gener..