This is a DC to DC step-down module base on LM2596 3A Step-Down Voltage Regulator. The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down(buck) switching regulator, capable of driving a 3A load with excellent line and load regulation...
The LM350 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 3A over a 1.2V to 33V output range.They are exceptionally easy to use and require only 2 external resistors to set the output voltage.Further, both line and load regulation are comparable to di..
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation.
This is an adjustable output version. Requiring a minimum number of external compo..
This adjustable voltage regulator can provide you with an adequate power supply for your new electronics project.
Specifications:
Output current: up to 1.5 A (minimum), up to 2.2 A (typical).
Adjustable output voltage range: between 1.2 V and 37 V.
Maximum input-output voltage differential: 40..
The LM317 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range.
Features
Output voltage range: 1.2 TO 37V
Output current in excess of 1.5A
0.1% line ..
Specifications
Input Voltage -35V
Output Voltage -9V
Topology Standard
Regulator Output Type Fixed
Polarity Type Negative
Number of Outputs 1
Package Type TO-220AB
Packaging Rail/Tube
Output Current 2.2(Typ)A
Load Regulation 180mV
Line Regulation 180m..
The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices.Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two ..
A converter board for electrical levels Chip Model: MAX3232CSE
Voltage Range: 3~5V Max.
Baud Rate: No more than 120kbps
Dimension: 15.875mm x 9.398mm x 2.54mm..
It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCUSpecifications:Communication chip: domestic MAX3232WorkingVoltage: 3.3V-5.5VPort: TX RX VCC GNDMatched RS232 UART extension lineSize: approx. 4.5 x 3cm (L*W)..
W10M Bridge Rectifier
Specifications:
Peak Reverse Voltage (Vrrm): 1000V
Max. RMS Bridge Voltage (Vrms): 700V
Max. DC Blocking Voltage (Vdc): 1000V
Av. Forward Rectified Current (Io): 1.5A
Maximum Reverse Current (Ir): 10µA
Forward Volt Drop per Element (Vf): 1.0V
&n..
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
Specifications
Input voltage: between 5 V and 32 V
Output voltage: adjustable between 5 V and ..