Discontinued XBee Pro S2B
Product Images shown are for illustrative purposes only and may differ from the actual Product. Due to differences in PCB manufacturers, colours, pin mappings, markings & packaging of products/PCBs may also differ from those shown above.

Zigbee Mesh Networking, 2.4 GHz Point-to-point, point-to-multipoint, & peer-to-peer, DSSS (Direct Sequence Spread Spectrum), Channel Capacity 16, 10-bit ADC inputs.

Application Ideas

  • Remotely Monitor and Control Wind Turbines
  • Network-Enable Wireless Access Control Points
  • Reduce Hotels' Energy Costs
  • Wireless Mesh Technology Used in Life Saving Application
  • Monitoring Cooking Oil in Restaurants
  • Automating Parking Structure Systems
  • Remote Building System Management
  • Monitoring Residential Wind Turbines
  • Monitor Harsh Environments
  • Monitoring Farm Silo Levels
  • Monitoring Fluid Levels at an Automobile Quick Lube Station
  • Measuring Tank Levels in a Brewery
  • The XBP24-Z7WIT-004 module is part of the XBee ZB family which provides ZigBee level interoperability with ZigBee devices from other vendors. This hardware is only compatible with other ZB XBee modules; it is not compatible with the XBee 802.15.4.
  • How else do the ZB XBee modules differ from 802.15.4? ZB: Is compatible only with ZB family
  • Slightly longer communication distance:  400 feet and up to two miles line of sight for the 1.25 mW and 60 mW modules respectively
  • Maximum baud rate is higher at up to 1 Mbps
  • Slightly lower power consumption than 802.15.4
  • Two less A/D I/Os and two more digital I/Os than 802.15.4
  • The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks. If this is not a requirement, 802.15.4 may be perfectly suitable for your project. Still having trouble deciding whether to use 802.15.4 or ZB? 
  • Because the XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.


  • Wire antenna
  • Cross-compatibility with other ZB modules
  • Low-power sleep modes
  • 300 ft (90 m) indoor/urban range and 2 miles (3200 m) outdoor line-of-sight range
  • Configured with API or AT commands, local or over the air
  • 10 digital I/O and (4) 10-bit ADC inputs

Adapter Boards

  • XBee Adapter Board
  • XBee USB Adapter Board

Application Ideas

  • Remote controlled Boe-Bot robot
  • Wireless data acquisition
  • Remote signal beacon for adventure seekers
  • Remote industrial monitoring
  • Lighting control
  • Keyless entry

Key Specifications

  • 1200 bps – 1 Mbps interface data rate
  • 2.4 GHz frequency band (accepted world-wide)
  • Industrial temperature rating (-40C to 85C)
  • Transmit power 60 mW (+ 18 dBm)
  • Supply voltage 2.7-3.6 VDC; transmit current 205 mA; receive current 47 mA
  • Power-down current <3.5 uA
  • 3.3V CMOS UART interface level

Write a review

Note: HTML is not translated!
    Bad           Good

XBee Pro S2B

If your required quantity is more than listed below, please ping us for lead time enquiry & to pre-order.
GST Invoice for Input Tax Credit.
  • Views: 9529
  • Product Code: Pro S2B
  • SKU: PL-6-585
  • Availability: Discontinued
  • Rs. 2,354.10
  • Exclusive of GST: Rs. 1,995.00

For bulk & volume priced Corporate/B2B/Academic orders, please contact us for Estimate.

Discuss about this Product
Recent Customer Reviews