Menu
Your Cart

PIC16F877A Microcontroller(PDIP)

PIC16F877A Microcontroller(PDIP)
PIC16F877A Microcontroller(PDIP)
2 - 3 Days
PIC16F877A Microcontroller(PDIP)
PIC16F877A Microcontroller(PDIP)
PIC16F877A Microcontroller(PDIP)
GST Invoice
GST Invoice for Input Tax Credit.
Bulk Order
If your required quantity is more than listed below or for Bulk Orders/Quotes, please ping us for lead times & to pre-order.
Rs. 271.40
Ex Tax: Rs. 230.00
  • Stock: 2 - 3 Days
  • Model: IC-PIC16F877A
  • SKU: PL-632

This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.  

 

Features 

  • Microchip PIC 16F877A (with 20 MHz Crystal Oscillator & Boot loader Software)
  • High Performance RISC CPU
  • 8 K Words Programmable Flash Memory
  • 368 bytes Data Memory (RAM)
  • 256 bytes EEPROM
  • 20 MHz Operation (200ns instruction cycle)
  • 33 I/O pins
  • 8-Channel 10-bit Analog to Digital Converter (ADC)
  • Two PWM Channels
  • Two Capture modules (16-bit with max. resolution 12.5 ns)
  • Two Compare modules (16-bit with max. resolution 200 ns)
  • Two 8-Bit Timer/Counter
  • One 16-Bit Timer/Counter
  • One Serial USART
  • One Master Synchronous Serial Port (MSSP)
  • One Serial Peripheral Interface(SPI) Module
  • One Inter-Integrated Circuit (I2C) Module
  • Power-On Reset (POR), Power-Up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Interrupt Capability (up to 14 sources)
  • Eight Level Deep Hardware Stack
  • ICSP Programming
  • Brown Out Reset
  • Low Voltage Programming
  • Power Saving Sleep Mode
  • Programmable Code Protection
  • Fully Static Design
  • Wide Operating Voltage 2.0V to 5.5V
  • Low Power Consumption 

Downloads

        Datasheet

 

Write a review

Note: HTML is not translated!
Bad Good