ADC0804 - 8-bit A/D Converter

DHT 11 sensor is digital temperature and humidity sensor module for Arduino and Raspberry pi b/B+/Ra..

Most popular type of basic display for displaying Numerical and Hexadecimal values. (Some rudimentar..

This is a small but very effective Linear current sensor module, This sensor module is based on ACS7..

The HC06 is a Serial port Bluetooth module which having fully qualified Bluetooth V2.0+EDR (Enhanced..

This hybrid transmitter module provides a complete RF transmitter and receiver module solution which..

This is a module made using DS3231 RTC and AT24C32 EEPROM. DS3231 is an extremely accurate, low cost..

LM35 is a precision IC temperature sensor with its output proportional to the temperature ..

Collection of different types of capacitors4.7 pf, 10pf, 15pf, 22pf, 33pf, 56pf, 68pf, 82pf, 82p..

Dot Board (Large) ..

Used to de-solder the solder or to remove the solder from the object or components. De-soldering is ..

Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Specificat..

This is one of the most popular display device used. This is a 16x2 (16 Characters on 2 lines) ..

A stepper motor is an electromechanical device which converts electrical pulses into discrete mechan..

2N7000 is an N-Channel MOSFET in TO92 Package. It can replace BS170 Mosfet. Datasheet:2N7..

L14F1 - Phototransistor  Photodarlington, TO-18  Transistor Polarity: NPN ..

The BT136 is a high performance and popular triac. It is suitable for uses in mains appliance contro..

 BC 547 NPN transistor 45V 100mA hFE 150 Specifications:BIPOLAR TRANSISTOR, NPN,..

BC107 is an NPN bipolar planner low power transistor which is mainly designed for gen..

The 555 Timer is the one of the most versatile linear hybrid Integrated Circuit (IC) which is used i..

The 74HC series are high speed CMOS chips that combine the speed of TTL (transistor-transistor-logic..

ADC0808 IC DescriptionThe ADC0808 is an 8-bit analog-to-digital converter IC. Use ..

Dip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part fro..

This is a 14 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily pluggi..

Seven LEDs  arranged in a rectangular fashion as shown. Each of the seven LEDs is called a segm..

Dip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a ..

This is a basic, 4-digit 7-segment display - red in color. It has a Common Anode. The display featur..

DPDT ON-OFF-ON Switch ..

A standard Slide Switch  ..

A single-pole, single-throw (SPST) switch is as simple as it gets. It’s got one output and one..