Development Boards

Brand: Onion
The Power Dock allows you to use any 3.7V LiPo battery to power your Omega and then charge the battery when it’s out of juice. It has the same form factor as the Expansion Dock and can also be used in the same way: no battery and receiving power through the Micro USB port. The Dock breaks out the Om..
Rs. 995.00
Brand: Onion
Note: This Expansion requires a Dock with an Expansion Header to use, such as the Expansion Dock, Power Dock, or Arduino Dock R2.The Proto Expansion for the Onion Omega allows you to create your very own expansion that interfaces with your Omega. It provides a small soldering area and 30-pin header ..
Rs. 295.00
Brand: Onion
Note: This Expansion requires a Dock with an Expansion Header to use, such as the Expansion Dock, Power Dock, or Arduino Dock R2.The Relay Expansion enables your Omega to control two other, independent electrical circuits. The circuits are isolated from the Omega and can operate at much higher or lo..
Rs. 1,195.00
The STM32F030x microcontroller incorporates the high-performance ARM Cortex™-M0 32- bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 64 Kbytes of Flash memory and up to 8 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices off..
Rs. 295.00
This board is low cost Minimum System Development Board for ARM Microcontroller – STM32F103C8T6. Board is suitable for learners that want to learn STM32 microcontroller with ARM Coretex-M3 32-bit core.
Features:
On-board Mini USB interface, you can give the board power supply and USB commu..
Rs. 375.00
Has your project outgrown the STM32F103C8 microcontroller on the “Blue Pill” dev board? Take a look at the F401 or F411 micros, with more flash, more RAM, higher clock speed, and hardware floating point. 84MHz, 256KB Flash, 64KB RAM, USB-C Connection.
Getting Started..
Rs. 422.00
Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy ..
Rs. 2,050.00
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program..
Rs. 1,950.00
This is a custom ESP32 (ESP-WROVER-B 8MB PSRAM) based development board with an onboard 2G/GPRS Module SIM800L. The USB Type C pluggable board also has an onboard LiPo Battery Charging Circuit & Connector and is a good choice for building IoT applications.
Features:
Hardware Sp..
Rs. 2,350.00
Overview:
WiFi Kit 8 is a cost-effective Internet of Things development board developed by HelTec Automation. The board contains the popular ESP8266 processor, 4MB Flash Memory, a CP2014 IC for USB to Serial Conversion, Lithium Battery Interface and Charge & Discharge circuit, on board WiFi Ant..
Rs. 1,095.00