40 Pin 2.54 mm Single Row Female Pin Header
This Break away female header connector is a Single-row, 40-pin (1×40), straight female header strip designed to match 0.1"(2.54 mm) male headers.These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables..
The RCY connector is a compact, 2.5mm (.098″) pitch wire-to-wire connector for use with a variety of circuits, from signal circuits to power supply circuits, in electrical equipment which is becoming more and more compact. The employment of a free spring contact method ensures stable contact p..
These are a longer version of our standard break away headers. They are 25mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. You will get a row of 40 pins. They can be broken or snipped to length.
MCP2515 Module adopts CAN controller MCP2515, and TJA1050 high-speed CAN transceiver. Onboard independent key.Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation. The connection between MCP2515 and MCU is through SPI.
Support CAN 2.0B protocol..
The module (Micro SD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the Micro SD card read and write files. Users can directly use the Arduino IDE comes with an SD card to complete the library card initialization a..
This 2 Pin Wire to Board connector are used widely for connecting Wires to Boards, It can be for Power Supply or connecting any other peripheral like Motor to the Board. The distance between two mounting pins is in multiple of standard 5 mm so that this connector can be mounted easily on general pur..
1) It is easily interfaced as a peripheral to your arduino sensor shield module.
2) Through programming, you can read and write to the SD card using your arduino.
3)Can be used for SD Card more easily, such as for MP3 Player, MCU/ARM system control
4) All SD SPI pins output, MOSI, SCK, MISO and CS.