The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provi..
LM358 indicates an 8-pin chip, containing two op amps at low power.
The LM358 is designed for general use as amplifiers ,high-pass filters and low , band pass filters and analog adders.One of the characteristics of this IC is to be designed to operate with a single static power supply ranging from ..
The MAX232 is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply.Each receiver converts TIA/EIA-232-F inputs to 5-V TTL/CMOS levels.These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5 V, and c..
The MAX485 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.
These transceivers draw between 120µ..
The MCP23017/MCP23S17 (MCP23X17) device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:
• MCP23017 – I2C interface
• MCP23S17 – SPI interface
The MCP23X17 co..
MCP3008 is an 16 pin Analog to Digital converter from Microchip. If you require a 8 Channel ADC with resolution higher than ADC0808 then this ADC is for you. Moreover it communicates with controller using SPI interface thereby saving controller pins. So now no need of using higher pin controllers ju..
The MCP3208 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP 3208 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial inte..
The 555 Timer is the one of the most versatile linear hybrid Integrated Circuit (IC) which is used in variety of pulse generation, timer and oscillator applications.
The 555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggeri..
Dual ultrafast power diodes in a SOT78 (TO-220AB) plastic package. These diodes are rugged with a guaranteed electrostatic discharge voltage capability.
PC817 - High Density Photocoupler
Current transfer ratio
(CTR: MIN. 50% at I=5mA, Vce=5V)
High isolation voltage between input and output
System appliances, measuing instruments
Registers, copiers, automatic Vending machines
This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. T..
TDA2030 is a 14W audio amplifier IC comes in TO220-5 pentawatt package. This IC has a very low harmonic distortion, short circuit protection and thermal shutdown. This audio amplifier can work with single supply as well with dual supply, can be bridge for higher output power. Check the datasheet for..