16GB Micro SD Card (Class-10) for Raspberry Pi Model B+, Raspberry Pi 4Model B. Please note that the Memory card can be either of, Transcend/Sony/Kingston/SanDisk brand. This comes with the latest Raspbian Wheezy OS with an updated kernel/firmware. ..
4GB Micro SD Card for Raspberry Pi 2 Model BThis comes with the latest Raspbian Wheezy OS with an updated kernel/firmware .Please note that the Memory card can be either of Transcend/Sony/Kingston/SanDisk brand.This OS image has been tested on the Raspberry Pi 2 Model B...
8 GB Micro SD Card for Raspberry Pi Model B+, Raspberry Pi 2 Model B. Please note that the Memory card can be either of, Transcend/Sony/Kingston/SanDisk brand. This comes with the latest Raspbian Wheezy OS with an updated kernel/firmware.This OS image has been tested on the Raspberry Pi 2 Model..
The AD623 is an integrated, single- or dual-supply instrumentation amplifier that delivers rail-to-rail output swing using supply voltages from 3 V to 12 V.
The superior accuracy of the AD623 is the result of increasing ac common-mode rejection ratio (CMRR) coincident with increasing gain; line noi..
Antenna GSM- 2DBI Sticker is a Quad-band antenna for embedded cellular devices.
This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.
This antenna is compati..
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and e..
L293D is a dual H-bridge motor driver integrated circuit (IC).Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
L293D contains two inbuilt H-bridge driver circuits. In its..
The Photon is a tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.
The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you ..