[Update 18 Aug 2020] Online Orders are being processed through our website & bulk orders through Email/Phone. Retail Store @ Kondapur, Hyderabad is now open again for Order pickups / walk-ins.
New STM32F401 BlackPill STM32 Development Board (STM32F401CCU6)
Product Images shown are for illustrative purposes only and may differ from the actual Product. Due to differences in PCB manufacturers, colours, pin mappings, markings & packaging of products/PCBs may also differ from those shown above.

Has your project outgrown the STM32F103C8 microcontroller on the “Blue Pill” dev board?  Take a look at the F401 or F411 micros, with more flash, more RAM, higher clock speed, and hardware floating point.  84MHz, 256KB Flash, 64KB RAM, USB-C Connection.

 

Getting Started:

 

STM32F401CCU6 Features:

 

  • Dynamic efficiency line with BAM (batch acquisition mode)
    • 1.7 V to 3.6 V power supply
    • -40 °C to 85/105/125 °C temperature range
  • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 84 MHz, memory protection unit, 105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories
    • 256 Kbytes of Flash memory
    • 512 bytes of OTP memory
    • 64 Kbytes of SRAM
  • Clock, reset and supply management
    • 1.7 V to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Power consumption
    • Run: 128 μA/MHz (peripheral off)
    • Stop (Flash in Stop mode, fast wakeup time): 42 μA typ @ 25 °C;65 μA max @25 °C
    • Stop (Flash in Deep power down mode, slow wakeup time): down to 10 μA typ@ 25 °C; 28 μA max @25 °C
    • Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V
    • VBAT supply for RTC: 1 μA @25 °C
  • 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
  • General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
  • Up to 11 timers: up to six 16-bit, two 32-bit timers up to 84 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer
  • Debug mode
    • Serial wire debug (SWD) & JTAG interfaces
    • Cortex®-M4 Embedded Trace Macrocell™
  • Up to 81 I/O ports with interrupt capability
    • All IO ports 5 V tolerant
    • Up to 78 fast I/Os up to 42 MHz
  • Up to 11 communication interfaces
    • Up to 3 × I2C interfaces (1Mbit/s, SMBus/PMBus)
    • Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
    • Up to 4 SPIs (up to 42 Mbits/s at fCPU= 84 MHz), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
    • SDIO interface
  • Advanced connectivity
    • USB 2.0 full-speed device/host/OTG controller with on-chip PHY
  • CRC calculation unit
  • 96-bit unique ID
  • RTC: subsecond accuracy, hardware calendar

Write a review

Note: HTML is not translated!
    Bad           Good

STM32F401 BlackPill STM32 Development Board (STM32F401CCU6)

If your required quantity is more than listed below, please ping us for lead time enquiry & to pre-order.
GST Invoice for Input Tax Credit.
  • Views: 374
  • Product Code: STM32F401CCU6-Black-Pill
  • SKU:
  • Availability: 5
  • Rs. 499.00
  • Exclusive of GST: Rs. 422.88
  • 25 or more Rs. 470.82

For bulk & volume priced Corporate/B2B/Academic orders, please contact us for Estimate.

Tags: STM32, STM, Development Board

Discuss about this Product
 
Recent Customer Reviews