This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the I..
Transistor Polarity: NPN
Collector Emitter Voltage V(br)ceo: 30V
Power Dissipation Pd: 500mW
DC Collector Current: 800mA
DC Current Gain hFE: 100
Transistor Case Style: TO-18
No. of Pins: 3
Collector Emitter Voltage Vce..
2N3904 is a common NPN bipolar junction transistor.
Collector emitter voltage (Vce) of 40V
Continuous collector current (Ic) of 200mA
Power dissipation of 625mW
Operating junction temperature range from -55°C to 150°C
Collector emitter saturation vol..
The 2N3906 is a commonly-used PNP bipolar junction transistor intended for general purpose low-power amplifying or switching applications.
It is designed for low electric current and power and medium voltage, and can operate at moderately high speeds. When looking at the flat side with the l..
The 2N5551 is an NPN amplifier Transistor with an amplification factor (hfe) of 80 when the collector current is 10mA. It also has decent switching characteristics (Transition frequency is 100MHz) hence can amplify low-level signals.
Due to this feature, the transistor is commonly used for amplific..
3 Watt LED with Heatsink.
3W High Power Warm White LED
Luminous flux: 200Lm
Forward Voltage: VF3.4V (IF = 700mA TA = 25°C)
Forward Current : 700mA
Pulse Forward Current : 800mA
Viewing Angle: 120°
Soldering Temperature : 265°C for 5 sec...
3.2 inch Resistive Touch Screen TFT LCD for Raspberry Pi B/B+/Pi 2
Designed for Raspberry Pi Model B/B+/Pi 2, easy to use.
Supports Raspbian Operating System, enables your system to:
Play videos (supports multi formats, MP4 and so on)
Take photos by touching (up t..
Input: DC 4.5V--7V (input voltage must be greater than the output voltage high above 1V.)
Output: 3.3V, 800mA (load current can not exceed 800ma)
Dual-panel design, the layout is nice;
Specially designed two rows of needle fixing holes can be fixed direc..
3.3v Breadboard Power Supply is compatable with standdard Bread Boards but not compatable with GL-12 Bread Board.
Bread Board power supply module, compatible with 5V, 3.3V for MB102 Model
For MB102 bread plates
Input voltage: 6.5-12V (DC) or US..
This is a 3.3V Zener Diode 1/2 watt rating
This is a complete series of 1/2 Watt Zener Diode Voltage Regulators with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide passivated junctions. All this is in an axial-lead, transfe..