With Robotic Arm Edge, command the gripper to open and close, wrist motion of 120 degrees, an extensive elbow range of 300 degrees, base rotation of 270 degrees, base motion of 180 degrees, vertical reach of 15 inches, horizontal reach of 12.6 inches, and lifting capacity of 100g. ..
Use these Female to Female cables to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial connection. Cable color and shape may vary slightly from image as our stock rotates. Designed to provide a reliable and long-lasting connection...
Description:Yes, the same connecting cable for any development board. Use these cables to interface any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates.Male to FemaleWired straight through..
Yes, the same connecting cable for any development board. Use these cables to interface any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates.Male to MaleWired straight through..
RS 232 to 485 Convertor
RS232 to RS485 converters are mostly used in industrial and commercial environments. The reason is that the RS485 converter can be used for multi-drop networks, meaning that you for example can connect multiple RS485 devices to one computer. Up to 32 devic..
It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCUSpecifications:Communication chip: domestic MAX3232WorkingVoltage: 3.3V-5.5VPort: TX RX VCC GNDMatched RS232 UART extension lineSize: approx. 4.5 x 3cm (L*W)..
This 2 Pin Wire to Board connector are used widely for connecting Wires to Boards, It can be for Power Supply or connecting any other peripheral like Motor to the Board. The distance between two mounting pins is in multiple of standard 5 mm so that this connector can be mounted easily on general pur..
This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp ca..
1) It is easily interfaced as a peripheral to your arduino sensor shield module.
2) Through programming, you can read and write to the SD card using your arduino.
3)Can be used for SD Card more easily, such as for MP3 Player, MCU/ARM system control
4) All SD SPI pins output, MOSI, SCK, MISO and CS.
Self assembly Mini Solar Powered DIY Car Kit
DIY Solar Car with exquisite color graphical installation tutorial, contains screwdrivers, the production process is very simple
Model of solar energy generator
Size: 10 cm * 10 cm * 5 cm (l * w * h)
Weight: 121 g
1Pc Mini Sola..
The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins. The Sense HAT has several integrated circuit based sensors that can be used for many different types of experiments, applications, and even games.
Gyroscope – angular rate sensor: ±245/5..
Want to start playing with sensors, but don't know where to start? This kit includes a sensor for just about every job. With everything included in this kit, you'll be able to sense acceleration, distance, compass heading, vibration, humidity, movement, ambient light, temperature, and more! These ar..