Search
Search Criteria
Products meeting the search criteria
Discontinued
2.4 inch TFT touch screen LCD Arduino Shield
Features:
2.4" diagonal LCD TFT display
Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
Colorful, 18-bit 262,000 different shades
4-wire resistive touch s..
Rs. 525.10
Ex Tax:Rs. 445.00
Discontinued
2.4G CT6B 6-Channel Transmitter+Receiver (R6B) (Complete Radio System for RC Helicopter+Airplane)Features:
Channels: 6 Channels
Model Type: Heli, Airplane, Glid
RF Power: Less than 20db
Modulation: GFSK
Code Type: 2.4Ghz No Interference
Sensitivity: 1024
Low Voltage Warning: LED
DSC Port: Yes
Charge..
Rs. 4,130.00
Ex Tax:Rs. 3,500.00
Hot
High quality adjustable angle antenna with integrated SMA connector. Designed for low power 2.4GHz transceivers such as 802.11b/g, Bluetooth, and other 2.4GHz telemetry modules with suitable connector. Angle of antenna can be adjusted to a 90° right-angle...
Rs. 212.40
Ex Tax:Rs. 180.00
Discontinued
2.9 Inch E-Paper Module Printed Circuit Board is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it..
Rs. 1,475.00
Ex Tax:Rs. 1,250.00
Green LCD Display 20x4 Character
This is an industry standard JHD629-204A based controlled 4 lines x 20 characters LCD display with Black characters on Green background and back light. It is a parallel interface so you will need 7 pins for 4-bit mode or 11 pins for 8-bit mode to interface to ..
Rs. 413.00
Ex Tax:Rs. 350.00
Basic 20x4 Character LCD - White on Black 5V
Features:
20 characters wide, 4 rows
White text on blue background
Connection port is 0.1" pitch, single row for easy breadboarding and wiring
Single LED backlight with a resistor included, you can power it directly from 5V
Buil..
Rs. 413.00
Ex Tax:Rs. 350.00
220K ohm - SMD Package (1206) (10 units)...
Rs. 23.60
Ex Tax:Rs. 20.00
Potentiometer (POT) – 22kA Three terminal resistor with sliding contact to act s voltage dividerSpecification1/4 in. Shaft Diameter 3/8 in. Shaft Length form Threads ..
Rs. 21.24
Ex Tax:Rs. 18.00
This is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the ..
Rs. 14.16
Ex Tax:Rs. 12.00
24C04 512x8(4k) Serial CMOS EEPROM.
Features:
Low Voltage and Standard-Voltage Operation
2-wire Serial Interface
Schmitt Trigger, Filtered Inputs for Noise Suppression
Bi-directional Data Transfer Protocol
100kHz and 400kHz Compatibility
Write Protect Pin for Hardware Data P..
Rs. 16.52
Ex Tax:Rs. 14.00
New
24 Volt 10 Ampere Cube relay
This is a sealed 24 volt High quality Single Pole Double Throw (SPDT) Cube Relay. This relays can be used for switching High voltage 230 Volt devices and has current rating upto 10 ampere.
This is a perfect relay if you want to switch low power devices up..
Rs. 30.68
Ex Tax:Rs. 26.00
25N120 IGBT
25N120 1200 Volt, 25 Ampere NPT IGBT offers superior conduction and switching performances, high avalanche ruggedness and easy parallel operation. This device is well suited for the resonant or soft switching application such as induction heating, microwave oven.
Features of 25N1..
Rs. 141.60
Ex Tax:Rs. 120.00