Our Asifnagar (Mehdipatnam) Branch is temporarily closed for renovations. Please visit us at the Kondapur Branch. Thanks.

Arduino Due r3 (Clone)

Arduino Due r3 (Clone)

Product Images shown are for illustrative purposes only and may differ from the actual Product. Due to differences in PCB manufacturers, colours, pin mappings, markings & packaging of products/PCBs may also differ from those shown above.

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins , 12 analog inputs, 4 UARTs , a 84 MHz clock, an USB OTG capable connection, 2 DAC , 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The Arduino Due can be powered via the USB connector or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.


Specifications:

Summary

Microcontroller
AT91SAM3X8E
Operating Voltage
3.3V
Input Voltage (recommended)
7-12V
Input Voltage (limits)
6-20V
Digital I/O Pins
54 (of which 12 provide PWM output)
Analog Input Pins
12
Analog Outputs Pins
2 (DAC)
Total DC Output Current on all I/O lines
130 mA
DC Current for 3.3V Pin
800 mA
DC Current for 5V Pin
800 mA
Flash Memory
512 KB all available for the user applications
SRAM
96 KB (two banks: 64KB and 32KB)
Clock Speed
84 MHz


Write a review

Note: HTML is not translated!
    Bad           Good

If your required quantity is more than what's shown below, please ping us to know the lead time and to pre-order.

  • Views: 1759
  • Product Code: Arduino Due-R3
  • SKU: PL-16
  • Availability: 2
  • Rs. 1,450.00

For bulk (& discounted) or corporate/academic orders, please contact us for Estimate.

Discuss about this product here
 
Track Order