Dear Makers & Tinkerers, Raspberry Pi Zero W now available in Stock.

HM-10 Bluetooth Module with TI CC2541, UART, Bluetooth 4.0 / BLE

2 - 3 Days HM-10 Bluetooth Module with TI CC2541, UART, Bluetooth 4.0 / BLE

The HM-10 Bluetooth module combines the powerful and programmable Texas Instruments CC2541 Chipset with the required components to start right away with your BLE development.The module offers an on-board voltage regulator and is TTL-level and 5 V tolerant. The Bluetooth-SoC can be accessed via UART interface and supports AT-Commands for setup. It supports full Bluetooth 4.0 standard and can be used for your Arduino or microcontroller to Android or iOS communication projects.This module can be used to replace HC-05, HC-06 and HC-07 devices.This module can also be configured and used as an iBeacon for used with Apple devices.


A tutorial on configuring HM10 as an iBeacon can be downloaded here.


Datasheet:

        http://www.seeedstudio.com/wiki/images/c/cd/Bluetooth4_en.pdf


The default paring code with the HM-10 is 000000. It shows up as HMSoft peripheral device

Write a review

Note: HTML is not translated!
    Bad           Good

If your required quantity is more than what's shown below, please ping us to know the lead time and to pre-order.

  • Views: 16255
  • Product Code: Bluetooth-4.0-BLE-HM10
  • SKU: PL-5
  • Availability: 2 - 3 Days
  • Rs. 695.00

For bulk (& discounted) or corporate/academic orders, please contact us for Estimate.

Tags: BLE, Bluetooth, 4.0, iBeacon, IoT

Discuss about this product here
 
Track Order